<![CDATA[Two Roads Professional Resources, Inc.: jobboards]]> http://JOBS.2ROADS.COM/ en-us <![CDATA[Maintenance Mechanics (2)]]>
SPECIFIC JOB RESPONSIBILITIES & DUTIES:
. Performs schedules and prioritizes major repair work to ensure timely completion of department work orders and or assigned tasks.
. Primary function / duties include the change out ofmolds in the Seating / Aerospace operations.
. Conducts preventative maintenance repairs for all vital pieces of equipment.
. All electrical and mechanical troubleshooting.
Follow and adhere to Lock - Out / Tag - Out procedures at all times.
. Assist at all times with keeping the plant running as smooth as possible while working on maintenance projects and performing PM task.
. Recognizes waste and recommends initiative for elimination or reduction.
. Clean work areas at the end of the shift.
. Preventive Maintenance on equipment scheduled.
. Must ensure the parts you used are issued to the equipment in which they were used.
. Manages and work well with outside contractors.
. Monitors and makes requisitions on all necessary maintenance supplies to satisfactorily complete assigned projects.
. Assists in the preparation ofmonthly reports on activities of the department and condition of capital equipment.
. Continually updates the maintenance department work order system.
. Works under minimum supervision.
. Must ensure safe work practices.
. All other tasks as assigned.

----------------------------
Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
Thu, 18 Jan 2018 00:00:00 PST . High School Diploma with subsequent course work in general vocational skills and / or physical sciences, or equivalent experience; and
. Minimum five (5) years, experience performing facility maintenance in a manufacturing or industrial environment.

REQUIRED KNOWLEDGE AND SKILLS:
. Principles and practices of facility maintenance; press operation; pressure vessel operation; methods and means of corrective and preventative maintenance to ensure compliance with all regulatory authorities and company policy.
Have the basic working knowledge of two major disciplines (i.e. plumbing and pipefitting, carpentry, painting service or machinery, electrical repair and maintenance of equipment, hydraulic system repairs of equipment, boiler tending and custodial.
. Communicating effectively, both verbally and in writing; demonstrating above average knowledge and ability in electrical, mechanical, structural and all other general vocational skills; welding, pipe fitting, equipment rebuilding, tool fabrication, boiler maintenance, HVAC and other facility utilities; working long and irregular hours, including Saturdays and Holidays, when necessary; ability to work under pressure conditions; achieving results through personal and performance and subordinates; and maintaining productive order in an environment of changing priorities.
. General knowledge of safety procedures and ability to follow safe working practices.
Must be able to work under minimum supervision.
. Maintain housekeeping of personal work area, work department areas, and overall Company surroundings to company standards of safety and professionalism.

PHYSICAL REQUIREMENTS:
. Ability to work safely throughout our manufacturing facilities.
. Sit, stand, bend, stoop, reach, push, and pull as needed for the duration of the work shift.
. Able to work effectively under pressure of deadlines.
. Able to work full time, at least 8 hours a day and 5 days a week, plus overtime as may be required.
. Good vision required (with or without corrective lenses).
. Able to lift up to 40 lbs. as needed (as appropriate with or without the assistance of another worker or lift apparatus).]]>
1
<![CDATA[Quality Control Inspector III]]> Responsible for the day to day recording and validation of material between customers, vendors and operations.

Essential Duties and Responsibilities

Inspects materials and products, for conformance to specifications
Inspects finished product for quality and customer requirements.
Inspects finished or in-process fabricated or mechanical parts, equipment and assemblies
of a complex nature and determines acceptance or rejection.
Carry out policies and procedures for testing and evaluating product.
Responsible for operating mechanical and electrical test equipment.
Working to Standard Operating Procedures (work instructions)
Assists in recording of Non-conformities of parts/product.
Assisting in the controlling/segregating of conforming vs. Non-conforming parts /product
Evaluates parts or assemblies against standards, blueprints, engineering, and specifications
Leads and directs the work of others and assists in the training of less experienced inspectors.
Work safely at all times and report any unsafe conditions or injuries to your Supervisor or Manager immediately.
Ability to operate a CMM.
Assists in the training of less experienced inspectors.
Other duties, as assigned by supervision or management.
----------------------------
Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
Thu, 18 Jan 2018 00:00:00 PST To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Extensive knowledge and experience in all areas of inspection
Attention to detail and good organizational skills
Strong and extensive experience with CMM inspection equipment.
Excellent communication skills, oral and written.
Familiar with a variety of the field s concepts, practices, and procedures.
7-10 years of experience in the field or in a related field.

Education
High school diploma or GED, and up to one year work experience.
Computer Skills
Must be proficient in MS Office (Excel, Word, PowerPoint, and Outlook).
Must be proficient in PCDMIS and/or VDMIS.
Knowledge of Verisurf and Catia is a plus.]]>
1
<![CDATA[General Manager]]>
  • Review and recommendation of contracts and T&C s.
  • Know your customers (it is kind of a repeat of the above, but it s really important so we repeat it). We need to be able to effectively assess the value of products to our customers for correct pricing and we need to understand their unspoken needs to position ourselves to meet their future product demands. Plus you will be required to perform sensitive negotiations leading to win-win outcomes.
  • Preparation of monthly, mid-quarter, and quarterly product segment and new business reports for sales and bookings.
  • Presenting quarterly and annual reports on product line performance to senior corporate management.
  • Learning the technical specifics and usage applications of the product line. Having some technical acumen and mechanical aptitude is an absolute must.
  • Training support for sales, representatives and distributors on products, new technology, and capabilities for respective product line.
  • Coordinate preparation of marketing literature, brochures, and catalogs with Sales Director.]]> Thu, 18 Jan 2018 00:00:00 PST A degree (in technical discipline is preferred) along with a demonstrated ability to learn and grow throughout your career is. In lieu of a technical degree multiple years of experience working with technical products is an adequate substitute.
  • 5 to 10 years of leadership experience preferably in an Aerospace manufacturing environment. Must have managerial experience overseeing crucial roles such as: Engineering, Sales/Marketing, Contracts/Purchasing and Quality/Production.
  • Forecasting, Long-term strategy vision, supplier base experience.
  • Exposure to P&L responsibilities and assembling or interpreting financial data is necessary.
  • A working knowledge of schedule, cost and material handling software (ERP or MRP) systems. Having the ability to manipulate the data with Excel or Access would be helpful.
  • Familiarity with interpretation of customer needs and opportunities for product development and market expansion should be capable of being demonstrated.]]> 1 <![CDATA[7553248 Checkers]]>
    Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition tolerance stacks and calculations, includes models, drawings and PLM attributes and relationships.

    40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

    30% - Performs design calculations to validate any phase of design requirements.

    20% - Estimation of resources and schedule required to complete a design activity and training to staff.

    10% - Provide technical guidance to less senior CAD designers and to design support personnel.
    Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill preferred).
    -Knowledge of Mechanical Aerospace hardware required.
    -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
    -ASME Certification in GD&T is a plus.
    -Ability to read and interpret product definition and related specifications.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Thu, 18 Jan 2018 00:00:00 PST Skills and Experience:
    Required Skills:
    AEROSPACE DESIGN
    CREO
    GEOMETRIC DIMENSIONING
    GEOMETRIC TOLERANCING
    WINDCHILL]]>
    1
    <![CDATA[7550845 - Project Engineer]]> ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Thu, 18 Jan 2018 00:00:00 PST 1
    <![CDATA[Contracts Administrator]]>
    Responsibilities include proposal preparation and follow-up, review of customer's supplier portal for new orders, change orders and order entry, and participation in meetings in support of the customer's schedule requirements. This position interacts with Business Development, Engineering, Program Management, Purchasing, Quality, Manufacturing and the Executive Management Team.

    Key Responsibilities:
    Administers contracts and agreements in accordance with federal government regulations and company policies and procedures.
    Performs proposal preparation, contract administration, and customer contact activities in accordance with company policies and procedures, legal requirements, and customer specifications.
    Performs Contract Reviews as required to inform internal departments and management of contractual requirements for the programs/customers for which you are responsible;
    Compiles and analyzes data; and maintains historical information
    Prepare and report weekly and monthly bookings and sales (shipments) for management.
    Enter new orders and change orders into Made2Manage ERP System (review for accuracy).
    Attend meetings as needed in support of new business requirements.
    Provide backup support for Composite Seating Products, Mechanical Seating Products,
    Space and Defense Products and Commercial Products as required.

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Thu, 18 Jan 2018 00:00:00 PST
    Must have relevant experience in the Aerospace Industry
    Made2Manage ERP System experience would be a plus.
    Knowledge of the Federal acquisition process and. applicable laws and regulations including Federal Acquisition Regulations (FAR) and Defense Federal Acquisition Regulations (DFAR)
    Able to work in fast paced, self directed environment.

    Exceptional verbal and written communication skills.
    Highly proficient computer skills including MS Word, Excel and Outlook.
    Excellent time management skills.
    Highly energetic and self-starter.
    Decision-making, problem resolution and creative thinking skills
    Able to multi-task the activities with shifting priorities.

    Qualifications:
    Undergraduate degree preferred with 3+ years of experience in Ist tier and 2nd tier contracting.
    Experience reading, understanding, and administering Long Term Agreements (LTA),
    Able to identify customer specific requirements and flow the requirement down to appropriate departments.
    ]]>
    1
    <![CDATA[Manufacturing/Project Engineer ]]> Under the direction of Our Clients Engineering Manager, the Manufacturing Engineer performs a wide range of activities related to composite material manufacturing processes such as: compression molding, material compounding and processing knowledge, autoclave and hydroclave curing, machining, bonding, hand lay-up, and painting. Uses sound judgment in decisions that influence manufacturing processes and manufacturing through-put efficiencies. Controls costs by constantly improving and innovating their programs; maintains a budget and monitors shop floor activities to capture any and all opportunities to support the business.

    PRINCIPAL DUTIES AND DUTIES:
    Author manufacturing work instructions (Word, Excel, PowerPoint formats) which describe and direct technicians on how to perform the fabrication of aerospace hardware and assemblies.
  • Controls part configuration by managing customer TDP's / MDP's
    Maintains manufacturing operations, standards and BOM's via the ERP system
  • Coordinate with engineering and manufacturing personnel to develop and/or enhance manufacturing processes to meet or beat product material and labor efficiency budgets.
    Develop tooling concepts to perform specific manufacturing operations and coordinate tooling designs, procurement and implementation of tooling into manufacturing activity.
    a Support Project and Program Managers with current status of all activities assigned.
  • Ensure that all manufacturing processes meet company safety and environmental regulations,
  • Adhere to all company safety requirements.
    Submits weekly status reports for all activities, including milestone charts for long-term projects.
  • Continues professional development through independent study, college course work and/or professional seminars.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Thu, 18 Jan 2018 00:00:00 PST Must have a background in aerospace
    BS/BA degree in a technical discipline from an accredited college or
    university; or equivalent work experience.
    Minimum two years' experience in manufacturing engineering work in the composites industry.
    Must be a good communicator with strong interpersonal skills.
    Proficient knowledge of composite reinforced resin matrix technology.
    Knowledge of Microsoft Excel, Word and Outlook.
    Knowledge of AutoCAD or SolidWorks and Solid Modeling preferred.
    SKILLS:
    Communicate effectively, both verbally and in writing, within a diverse range of audiences and settings; evaluate budgets; and maintaining financial and administrative order in an environment of changing priorities.
    ]]>
    1 <![CDATA[Teamcenter Administrator]]>
    Project Scope: Technical responsibility for the Siemens PLM product suite (Teamcenter Unified and NX CAD); complex analytical problem-solving capability with systems administration skills and the ability to quickly learn new applications are primary qualifications. Will work with engineering and manufacturing groups to gather technical requirements, track milestones, and manage technical issues and risks. Work as a member of Engineering IT team with focus on configuration, performance tuning, user access, integration to CAD, and data conversion.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Wed, 17 Jan 2018 00:00:00 PST
  • Bachelors: Computer Science or Engineering or equivalent work experience
  • Advanced knowledge of Siemens PLM product suite.
  • Project management skills.
  • Advanced knowledge of process modeling techniques and tools.
  • Advanced knowledge of business process re-engineering.
  • Proficient with configuration control and software installation practices.
  • Previous experience of software testing.
  • Advanced knowledge of one or more of the following programming languages: Java, ITK, PLM, XML, XSTL, C, C++.
  • Advanced knowledge and previous experience of databases and CAD/CAM systems.
  • Advanced knowledge of IT hardware and operating systems.
  • Proficient experience of working with products in a UNIX and/or Windows environment
  • Minimum 5 years of previous experience in an engineering design environment.
  • Minimum 3 years of previous experience in Teamcenter Unified and NX CAD/CAM.
  • Awareness of ITIL processes.
  • Excellent written and verbal communication and presentation skills
  • Bachelors: computer science or engineering or equivalent work experience]]> 1 <![CDATA[IoT Systems Product Manager]]>
    We are looking for an energetic, emerging leader to jump in and help develop sensor and data acquisition products in the Industrial Internet of Things (IIoT) space, enabling us to provide complete solutions to customers.

  • Lead cross-functionally, gathering inputs from engineering, sales, business units, vertical marketing group and the market to drive business and product direction.
  • Ownership of Industrial Internet of Things (IIoT) application and system roadmaps.
  • Own product specifications, requirements, and release plans.
  • Research customer and user needs, write user stories, partner with user experience team for rapid prototyping, and work with engineering department to develop minimum viable products.
  • Work with marketing communications to define marketing strategies, helping them understand the key benefits, target customer and product positioning.
  • Work with technology team to produce world-class products driven by technology visionaries, domain experts, and customers.
  • Participate in user conferences and customer facing situations as a product expert.
  • Analyze growth rate, SAM, TAM, SWOT, market penetration and competition.
  • Propose product strategy changes as a result of competitive changes in the marketplace.
  • Monitor product profit margins.
  • Recommend optimum distribution channel strategies.
  • Develop sales tools in collaboration with product marketing and communications.
  • Support and deliver product collateral for applications teams and field sales.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Wed, 17 Jan 2018 00:00:00 PST
  • Must have an Engineering or Computer Science degree - Masters degree is a big plus.
  • Minimum of 3 years experience in software product management and/or working in a product development team.
  • Experience writing software, ideally for commercial use in the cloud, middleware, and/or on-premise.
  • Experience with Agile software development.
  • Experience in the industrial automation industry (understand the market and customer needs).
  • Pragmatic Marketing certification is a plus.
  • Proficient computer skills, Microsoft Word, etc.
  • Ability to represent products at a professional level.]]> 1 <![CDATA[Engineering Design Specialist]]>
    Design engineering specialist. Mechanical or aerospace engineering degree and experience with component design and integration.

    -Develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts.
    -Skilled in CREO modeling and drawing modules.
    -Requires strong communication skills, experience with selection of mechanical joining methods (bolted joints, welding) and the ability to manage CAD assemblies.
    -Plan and execute design tasks independently and work effectively within an Integrated Product Team (IPT) environment.

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Thu, 11 Jan 2018 00:00:00 PST -CREO top down design using skeletons.
    -Experience using up front analysis tools such as CREO Simulink or ANSYS workbench.
    -Machining and manufacturing knowledge is strongly desired.
    -Presentation skills are desired.

    Key Words:
    -Design, mechanical engineering, integration, CREO
    Keywords:

    Education: Mechanical or aerospace engineering degree and nine years of applicable experience.]]>
    1
    <![CDATA[Sales Account Manager]]>
    Position Duties: Essential functions of the position include, but are not limited to:

    Technical:
  • Must be well versed in technical features of products.
  • Must understand technical capabilities of company.
  • Must be able to understand technical requirements of customer and communicate these requirements as well as any other applicable industry requirements to the product teams.

    Accounts:
  • Maintain customer/account list and customer/account files.
  • Manage Sales Representatives activity and follow up on opportunities.
  • Maintain record of visits and telephone calls with customer.
  • Maintain contact with existing customers to keep abreast of existing orders in case customer requires assistance with delivery problems, pricing problems, technical support and to find out about new programs and contacts.

    Planning - Sales Plan:
    Prepare a sales plan for assigned region.
    Keep abreast of new programs and/or modifications to existing programs.
    Research periodicals.
    Continuously question contacts.
    Follow up on leads from Sales Administration.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Thu, 11 Jan 2018 00:00:00 PST 1 <![CDATA[Lead CNC Machinist]]>
    Duties
    * Program, Setup, 1st Article Inspection and Production Jobs
    * Complete new Short Run Projects from drawing to finished parts
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Wed, 10 Jan 2018 00:00:00 PST * 5 years CAD/CAM programming experience
    * 10 Years CNC lathe/mill experience
    * Strong background in job shop environment
    * Okuma and Haas controls
    * UN and Acme threading experience a plus
    * MasterCAM and Set up experience a plus
    ]]>
    1
    <![CDATA[Mechanical Engineer]]> ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Wed, 10 Jan 2018 00:00:00 PST 1
    <![CDATA[Technical Writer]]> Responsible for producing and maintaining high quality technical documentation for internal and external users.

    Position Duties
    Essential functions of the position include, but are not limited to:

  • Create and maintain Component Maintenance Manuals, Illustrated Parts Catalogs, Service Bulletins, and Service Letters Programs. Ensure the program adheres to all FAA, FAR and ATA regulatory requirements. Manage the distribution of manuals to customers.

  • Provide written data and text used in the development of technical manuals, supplements and related technical documentation.
  • Create and maintain product documentation including ATP s, work instructions, and process specifications.
  • Create and maintain qualification and certification related procedures and reports.
  • Provide technical support to other departments in the development of publication quality documentation.
  • Maintain and administrate PDM system.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Mon, 08 Jan 2018 00:00:00 PST Education & Experience:
    1. Associate Degree or related experience in engineering documentation field with a minimum of five or more years of technical writing experience.
    2. Is very organized and methodical, good written and verbal skills.
    3. Should possess strong skills in MS Word, Excel, PowerPoint and any experience in MS Access is a plus. Experience with publishing software is a plus.
    4. Must be able to pay attention to details.
    5. Ability to be detailed oriented.
    6. Ability to communicate with others in group and individual environments.
    1. Must be familiar with aircraft technical manuals and the ATA system.
    2. Must be a self-starter, highly motivated and able to work under pressure with a minimum level of supervision.
    3. Must be able to sit and work at a computer work station for extended periods of time.
    4. Must be able to read, write, speak and understand the English language.
    ]]>
    1 <![CDATA[Manufacturing Engineer]]>
  • Developing, evaluating, improving, and documenting manufacturing processes.
  • Designing and implementing production and test fixtures and tooling.
  • Familiar with dynamometers, power supplies, hand tools, and machine shop equipment.
  • Analyzing manufacturing process flows to enhancement quality, cost reduction, and productivity.
  • Collaborating with all departments regarding product design to ensure effective production methods.
  • Ability to clearly write or edit technical documentation and assembly or process instructions.
  • Knowledge of circuit boards, electronic parts, electronic equipment, and computer hardware and software, including applications and programming.
  • Help trouble-shoot and drive root cause analysis for failed electric motors and generators.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Mon, 08 Jan 2018 00:00:00 PST Bachelor s degree in Electrical, Mechanical, or Manufacturing Engineering preferred. Open to other Engineering degrees combined with 1+ years experience in electro-mechanical manufacturing or test processes, equipment, and tooling. Must be able to read manufacturing drawings, electrical schematics, and process procedures. Familiarity with ISO, AS 9100, and DO178/254 desirable. Applicant should be skilled in all MS office applications.
    ]]>
    1 <![CDATA[Program Manager]]> A Program Manager leads multiple aerospace and military engineering and manufacturing IPD teams through design, development, qualification and LRIP production phases, acting as primary point of contact for customers for these phases. Program Managers perform project planning, progress measurement, scope control, and status reporting to executive management and customers. Someone in this role will carry out business development activities and coordinate initiatives across assigned market segments.
    Essential or Primary / Key Responsibilities:

    Responsible for:
    NRE Cost, Design to Cost, and Schedule performance for assigned projects. (Shared with functional department leadership)
    Customer satisfaction for assigned projects.
    Creation and release of project Work Breakdown Schedule.
    Creation and maintenance of project Integrated Master Schedule.
    Facilitating all IPD Team meetings with documentation of minutes and maintenance of Action Item Lists.
    Reviewing and creating labor and material plans and cost reports.
    Control of project scope.
    Creation of monthly Program Review materials for assigned projects.
    Resolution and coordination of project cost, schedule, and technical performance issues.
    Escalation of issues that cannot be resolved at the project team level.
    Identifying opportunities to grow business content with associated project customers.
    Identifying new or synergistic business opportunities in associated market segment.
    Supporting significant proposals with related PMO inputs. Scrubbing proposal Bases of Estimates.

    Expected to achieve:
    Project NRE expenditures to within 10% of BAC.
    On-time delivery of major milestones to within 2 weeks of baseline.
    The highest level of customer satisfaction.
    Early detection of risks.
    Demonstration of highest ethical standards

    Additional Duties / Responsibilities:
    Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Client organization (as required).
    Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company
    Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements
    Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization
    Actively participate in team meetings, improvement initiatives/programs, etc. To provide constructive recommendations and initiate actions to support company initiatives/goals
    Consistently demonstrate commitment to company values
    Keep management informed of area activities and of any significant problems
    Assume responsibility for related duties as required or assigned
    Ensure that work area and work areas of direct reports are clean, secure, and well maintained
    Complete special projects and miscellaneous assignments as required
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Fri, 05 Jan 2018 00:00:00 PST
  • Bachelor s degree or equivalent in an engineering, science, or business discipline
  • Minimum 2 years experience in aerospace and/or military mechanical and/or electrical component and/or systems engineering design, development, and manufacturing.
  • Understanding of basic PM principles, such as those promoted by the Project Management Institute
  • Exemplary verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc.
  • Highly computer literate, with MS Office/PC expertise, and demonstrated experience with applicable systems, programs, equipment, etc.]]> 1 <![CDATA[Senior Composite Design Engineer]]>

    Under limited general direction and following established policies, the Senior Engineer performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

    60% - Lead mechanical design activities for composite structures. Composite structures design activities include strategic booster motor composite cases, tactical rocket motor cases, composite armaments, composite over-wrapped pressure vessels, and composite flight structures. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment. Work is reviewed by senior staff.

    20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.

    10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

    10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Wed, 03 Jan 2018 00:00:00 PST
    Skills: -Composite Design Engineering and Composite Design Manufacturing experience required.
    -Experienced with composite structure preliminary sizing tools and FEA tools/methods preferably related to Composite Motor Cases/Pressure Vessels.
    -Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E.
    -Experienced in 3D modeling and 2D drawings.
    -Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.

    Keywords:
    -Composite, Composite Design, Composite Engineer, Composite Structures
    Keywords:
    Education: -Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.
    -An advanced engineering degree is a plus.
    Skills and Experience:
    Required Skills:
    AEROSPACE DESIGN
    CREO
    SIEMENS
    Languages:
    English]]>
    1
    <![CDATA[Senior Solid Propulsion Design Engineer]]>

    Under minimal direction, the Design Engineering Specialist performs professional assignments requiring complete working knowledge of application of concepts, practices, and techniques.

    60% - Lead mechanical design activities for solid propulsion systems and components. Solid propulsion design activities include strategic booster motors, tactical rocket motors, controllable solids, and manufacturing tooling design. Will independently develop design concepts, 3D models and support the development of detailed drawings for the manufacture of parts. Conduct trade studies and develop component specifications and procedures as required. Interact with component analysis, manufacturing, project engineering, quality and customer support groups. Plan and execute design tasks with limited general direction and work effectively within an Integrated Product Team (IPT) environment.

    20% - Participate in shop floor and production hardware processing at suppliers and internally. Provide input to address nonconforming hardware, process planning, support production meetings, and work with supply chain to assure that design requirements are met. Support engineering drawing and specification updates at configuration change boards.

    10% - Develop test plans and technical reviews. Assist in the identification and support of risk reduction and environmental test requirements. This may include manufacturing pathfinders, subscale testing, component and system level qualification tests.

    10% - Prepare material and support presentations for internal and external customers. Responsible for preparing engineering reports to support tolerance studies, engineering analyses or failure investigations, including technical close-out reports.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Wed, 03 Jan 2018 00:00:00 PST Skills: -Solid Propellant Motor Design and Manufacturing experience preferred.
    -Experienced with Computer Aided Design (CAD) tools such as Siemens NX or CREO/PRO-E.
    -Experienced in 3D modeling and 2D drawings.
    -Experienced with Solid Motor preliminary sizing tools and FEA tools/methods desired.
    -Minimum of five (5) years of directly related experience, or an equivalent combination of education and experience is required.

    Keywords:
    Propulsion, Solid Motor Propulsion, Rocket Motor, Controllable Solids, SDACS, TDACS,
    Keywords:
    Education: -Bachelor of Science degree in Mechanical, Aerospace Engineering, Materials Engineering.
    -An advanced engineering degree is a plus.
    Skills and Experience:
    Required Skills:
    AEROSPACE DESIGN
    CREO
    SIEMENS
    Languages:
    English]]>
    1
    <![CDATA[PDM/CAD System and Configuration Manager]]>
    Position Summary
    This position is responsible for the coordination of all technical documentation services including document control, configuration control, project files, archives, reproduction services, and the issuing of engineering technical documents. Responsible for ISO/AS compliance and audit functions within the configuration management group.

    Configuration Management
  • Manages the daily operation of the Configuration Management System and Document Control Center including document revision control.
  • Leads the effort in the development, compilation, maintenance, and control of engineering data.
  • Advise Engineers, Project Managers, Production and Quality personnel of the preferred strategies of change implementation.
  • Review, analyze and release of submitted designs and related documentation to ensure accuracy and consistency across the product groups.
  • Manage the department budget and productivity
  • Develops effective control of product configuration through establishment and maintenance of a configuration control system.
  • Oversees Document Change Board meetings
  • Implements internal policy and procedures associated with configuration management.

    PDM/CAD Administrator
  • Works with engineering to develop and implement workflows in the PDM/CAD system to support Product Development
  • Develop and maintain PDM/CAD software standards (work instructions) and best practices.
  • Work with IT to maintain and troubleshoot the PDM/CAD software vault.
  • Provide primary PDM/CAD software technical support to in-house users.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Tue, 19 Dec 2017 00:00:00 PST
    Experience:
  • Three or more years of experience in the Aerospace Industry in the areas of Configuration Management (CM), Document Control, Technical Publications, and Quality environment.
  • Knowledge of Product Data Management (PDM) systems. Knowledge of configuration management process, change control, procedural documentation, and the computer systems involved.
  • Big plus - Knowledge of SolidWorks PDM Professional with experience establishing workflows.
    Project management experience is a plus to help schedule and coordinate the activities of the team.

    Education
    Full or Associate Degree in Electronic Engineering, Technology, Mechanical Engineering, Industrial Engineering, or Quality Engineering.


    "Chat Live With Me Now: https://flashrecruit.com/user/joshtims"]]> 1 <![CDATA[Sr Soft Tooling Engineer]]> "Chat Live With Me Now: https://flashrecruit.Com/user/joshtims"


    Work with composite structure designers to generate ply definition and PMI/drawing views for solids created in NX
    Generate all necessary manufacturing data for composite fabrication including Fibersim geometry, flat patterns, Gerber programs, and laser projection programs
    Maintain a highly organized working database within Teamcenter
    Troubleshoot laser projector and cutting table programming issues
    Responsible to develop and design error-proofing tooling to assure build quality.
    Provide support to root cause build issues in development and production.
    Support the specification, evaluation and implementation of new capital equipment for the production process.
    Constantly learn new things and share them with your team members
    Performs other duties as assigned

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Mon, 18 Dec 2017 00:00:00 PST 5+ years of industry experience is preferred
    Siemens NX 11 component design and surfacing required
    Fibersim 15 Basic and Advanced (CEE and ACEE) experience required
    Teamcenter and Solumina experience required
    Gerber cutworks and Virtek LaserEdge troubleshooting expertise
    Understanding and application of GD&T
    Ability to adapt well to changing designs and requirements
    Ability to create tooling using solid modelling CAD systems such as NX, Solidworks or similar.
    Demonstrated experience in new product introductions from development through to volume production.
    Considerable knowledge and understanding of lean tooling concepts and its application to low and medium volume production programs.
    Experienced in the qualification of outside vendors for tooling fabrication.
    Familiar with the use of PFMEAs to reduce risk to the manufacturing process.
    Ability to create capacity plans to support departmental budgeting for capital equipment.
    Experience setting up new production facilities or work cells is required.
    Ability to work in both R&D and production rate environments.
    Ability and interest in teaching and improving the quality of production drawings throughout the Structures group
    Ability and willingness to thrive in a fast-paced, rapidly changing work environment

    Certifications or experience within aerospace, aviation or automotive is highly preferred.
    Passion for space exploration and a firm belief in the utility of affordable access to space
    Ability to thrive as a one person team

    "Chat Live With Me Now: https://flashrecruit.com/user/joshtims"
    ]]>
    1
    <![CDATA[Engineering Technician IV - Power Systems]]> "Chat Live With Me Now: https://flashrecruit.Com/user/joshtims"

    Manage and maintain asset inventory and inspection program with automated tablets, GPS units, and enterprise Geographical Information System (GIS) database.
    Assist field crew and project manager(s) with field engineering support including, design, troubleshooting, analysis, calculations, code compliance, and standards.
    Create AutoCAD drawings from engineering sketches.
    Update as-built CAD drawings per field red-lines.
    Update electrical model in ETAP or similar software programs to reflect field changes/modifications.
    Keep up-to-date with latest GIS, CAD, or system modeling software features and use them to improve performance efficiency.
    Assist engineers with calculations, cost estimates, technical reports etc.
    Create bill of materials (BOMs) for various upgrade projects.
    Learn and maintain basic power engineering concepts and fundamentals.
    Provide basic engineering support to installations as required.
    Assist purchasing of materials and equipment for various projects.
    Conduct site survey, data gathering, concept design, cost estimates, and customer coordination for new service applications.
    Keep track of power outages, prepare and present fault event reports, and document system reliability indices.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Mon, 18 Dec 2017 00:00:00 PST 2 years experience with a Bachelor of Science in Electrical Engineering (BSEE) is preferred.
    Intermediate understanding of medium voltage electrical substations and distribution system.
    Experience with power system analysis, distribution system modeling, and protective device coordination.
    Experienced in blueprints, specifications, proposals, and other documentation to prepare time/cost/labor estimates for projects and services.
    Ability to prepare construction schedules in Microsoft Project.
    Must have excellent analytical, organizational, verbal, written, and communication skills.
    Must be a team player and be able to work independently with various partners from start to finish.

    Work Authorization/Security Clearance:
    You must be a US Citizen authorized to work in the US without sponsorship.
    Military Base Security Clearance is required for this position.
    Valid driver s license and ability to travel if required.


    "Chat Live With Me Now: https://flashrecruit.com/user/joshtims"]]>
    1
    <![CDATA[Senior Quality Engineer ]]> "Chat Live With Me Now: https://flashrecruit.Com/user/joshtims"

    SUMMARY
    Plans and directs activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products by performing the following duties.

    ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. In performing functions, duties or tasks, employees are required to know and follow safe work practices, and to be aware of Company policies and procedures related to job safety, including safety rules and regulations. All functions, duties or tasks are to be carried out in an honest, ethical and professional manner, and to be performed in conformance with applicable Company policies and procedures. In the event of uncertainty or lack of knowledge of Company policies and procedures, employees are required to request clarification or explanations from superiors or authorized company representatives.
    Assists the Quality Assurance Manager in the execution of that person s duties.
    Will regularly stand in for the Quality Assurance Manager in their absence.
    This position shares in responsibility for the Quality and Environmental Systems, including procedure generation and implementation.
    Further duties include interviewing, selecting, and training employees, appraising productivity, handling employee grievances or complaints, or assisting in the disciplining of employees, determining work techniques, planning the work, apportioning work among employees, determining the types of equipment to be used in performing work, or materials needed, assisting in planning budgets for work, monitoring work for legal or regulatory compliance.
    Oversees and assists the revision of quality systems procedures, standards and methods for inspection, testing, and evaluation. Manages the internal auditing procedures and conducts audits.
    Works with customer representatives and third party auditors to conduct audits and resolve problems.
    Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
    Maintains supplier quality performance ratings and audits suppliers.
    Establishes program to evaluate precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
    Develops and implements methods and procedures for disposition of discrepant material and devices methods to assess cost and determine root cause. Monitors and follows up on proposed corrective actions to verify implementation and effectiveness.
    Investigates customer complaints and reports results to Sales department.
    Guides workers engaged in measuring and testing product and tabulating data concerning materials, product, or process quality and reliability as well as those who perform quality systems reviews and audits.
    Participates in the development of planning department documents to assure a quality plan is in place to produce conforming product in the most efficient manner.
    Compiles and writes training material and conducts training sessions on quality control activities.
    Trains employees in quality issues, appraises the performance of employees during audits for reporting to management, addresses quality complaints, and resolves quality related problems as assigned by management.
    Provides management with suggestions and recommendations for quality improvement.

    SUPERVISORY RESPONSIBILITIES
    Regularly supervises two or more other employees, and also has management as the primary duty of the position, and also has compelling input into the job status of other employees such as hiring, firing, promotions, or assignments.
    May guide other employees in the company who perform quality systems reviews and audits. Additional responsibilities include training employees; planning, assigning, and directing work relative to quality; appraising; addressing quality complaints and resolving quality related problems.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Mon, 18 Dec 2017 00:00:00 PST
    QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily and function effectively in a collaborative team environment. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    EDUCATION and/or EXPERIENCE
    Bachelor's degree (B. A.) from four-year college or university; five years experience as a Quality Engineer. Training in the forging industry is desired; or equivalent combination of education and experience. Non-destructive testing background preferred.

    LANGUAGE SKILLS
    Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management and groups of supervisors and managers using tools like PowerPoint and Excel software programs.

    MATHEMATICAL SKILLS
    Able to apply statistical tools for the purpose of continual improvement of products and processes, this will include the use of internal SPC database, collection of characteristic data, and compilation of reports utilizing software such as Excel to produce histograms, Pareto charts, bell curves, etc. A thorough understanding of advanced statistics and Six Sigma applications is preferred.


    "Chat Live With Me Now: https://flashrecruit.com/user/joshtims"]]>
    1
    <![CDATA[Mechanical Engineer]]>
    Understanding of production process, tooling, and machining systems
    Ability to work in a fast paced environment
    Able to take initiative, be flexible, and willing to participate in all of the primary functions of the machine shop
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Mon, 18 Dec 2017 00:00:00 PST
    Mastercam knowledge a plus, should have some type of CAD exposure/experience


    "Chat Live With Me Now: https://flashrecruit.com/user/joshtims"

    ]]>
    1
    <![CDATA[DevOps Engineer]]>
  • Build interfaces that bridge core services to their supporting resources such as automation tooling and resource APIs running in production.
  • Utilize a wide variety of open source technologies to create fault-tolerant, elastic and secure high performance data pipelines on a global scale.
  • Enhance infrastructure and procedures with an emphasis on fast and predictable pipelines facilitating multiple daily deployments in an always on, zero downtime environment.
  • Utilize and enhance monitoring systems to identify bottlenecks and automatically scale infrastructure to meet demand.
  • Work directly with software developers to simplify processes, enhance services and automate application delivery facilitating the release of production-ready software.
  • Proactively escalate and own issues to resolution before they become problems.
  • Troubleshoot issues across the entire stack; hardware, software, application and network within physical hardware and cloud-based environments.
  • Document maintenance and support procedures for routine and complex tasks.

    The core technologies used daily include:
  • Mesos/Marathon/Docker
  • Spinnaker
  • Google Cloud Platform
  • Amazon Web Services
  • Druid/Hadoop/InfluxDB
  • Jenkins
  • Ansible
  • Python
  • Go

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Wed, 06 Dec 2017 00:00:00 PST Deep understanding of Linux (Ubuntu and CentOS distributions preferred).
  • Experience using Python and Go to develop core infrastructure services and APIs.
  • Experience with containers and container orchestration tools (Docker, Mesos and Marathon experience preferred).
  • Experience with configuration management tools, deployment pipelines, and orchestration services in both cloud and self-managed environments (Ansible, Jenkins and Spinnaker preferred).
  • Experience and versatility administering many services spanning the entire application stack.
  • Experience troubleshooting and actively debugging live production systems.
  • Ability to identify improvements, and work with the team design solutions that will be deployed into production.
  • Ability to work independently and as a member of collaborative teams.]]> 1 <![CDATA[Manufacturing Engineer II/III]]>
    The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.
  • Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
  • The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Tue, 05 Dec 2017 00:00:00 PST B.S. degree in Manufacturing /Industrial Technology or Engineering required
  • Aerospace industry experience
  • Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing)
  • Manufacturing fabrication and assembly processes and systems

    Desired Skills:
  • Project management skills and MS Office applications (Word, Excel)
  • Delmia
  • Maestro
  • Windchill
  • Propulsion components]]> 1 <![CDATA[CMM Inspector]]> Utilize tolerance measurement tools, GD&T standards for components within design qualifications.
    Validate result output.

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Tue, 05 Dec 2017 00:00:00 PST
    Minimum of 3 years QA experience operating laboratory-grade scanning Coordinate Measuring Machines (CMM). Minimum of 3 years QA experience setting up and operating measuring systems to rapidly and accurately define complex, non-geometric shapes (without straight edges) such as turbine blades, screw and scroll compressors, gears, pistons, cams, crankshafts and fluid / gas ports. Knowledge of inspection analysis, scheduling and reporting.
    Previous programming CAD / CAM experience a plus.
    Previous experience in a professional racing environment preferred.
    Must be knowledgeable in Geometric Dimensioning and Tolerance (GD&T), surface roughness, manual inspection, surface plate techniques and raw material specifications.
    Previous experience with form & surface roughness program measurement system experience preferred. Knowledge of universal inspection tools and machine tool programming. Must be proficient in Microsoft Office Word & Excel.

    Ideal candidate possesses effective interpersonal skills; good verbal and written communication skills; strong organizational and time management skills and the ability to work in team environment.
    Must be self-motivated, self-directed with minimal supervision and works well under pressure and meet deadlines.
    Sub Competency: Transferring Skills: Writing; Customer Focus; Organizing; Managing]]>
    1
    <![CDATA[Engineering Technician IV - Power Systems]]> Assist field crew and project manager(s) with field engineering support including, design, troubleshooting, analysis, calculations, code compliance, and standards.
    Create AutoCAD drawings from engineering sketches.
    Update as-built CAD drawings per field red-lines.
    Update electrical model in ETAP or similar software programs to reflect field changes/modifications.
    Keep up-to-date with latest GIS, CAD, or system modeling software features and use them to improve performance efficiency.
    Assist engineers with calculations, cost estimates, technical reports etc.
    Create bill of materials (BOMs) for various upgrade projects.
    Learn and maintain basic power engineering concepts and fundamentals.
    Provide basic engineering support to installations as required.
    Assist purchasing of materials and equipment for various projects.
    Conduct site survey, data gathering, concept design, cost estimates, and customer coordination for new service applications.
    Keep track of power outages, prepare and present fault event reports, and document system reliability indices.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Tue, 05 Dec 2017 00:00:00 PST 2 years experience with a Bachelor of Science in Electrical Engineering (BSEE) is preferred.
    Intermediate understanding of medium voltage electrical substations and distribution system.
    Experience with power system analysis, distribution system modeling, and protective device coordination.
    Experienced in blueprints, specifications, proposals, and other documentation to prepare time/cost/labor estimates for projects and services.
    Ability to prepare construction schedules in Microsoft Project.
    Must have excellent analytical, organizational, verbal, written, and communication skills.
    Must be a team player and be able to work independently with various partners from start to finish.

    Work Authorization/Security Clearance:
    You must be a US Citizen authorized to work in the US without sponsorship.
    Military Base Security Clearance is required for this position.
    Valid driver s license and ability to travel if required.]]>
    1
    <![CDATA[CREO - Skeleton Designers - 7366164]]> ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Tue, 05 Dec 2017 00:00:00 PST 1
    <![CDATA[Engineering Technician IV - Power Systems]]> Assist field crew and project manager(s) with field engineering support including, design, troubleshooting, analysis, calculations, code compliance, and standards.
    Create AutoCAD drawings from engineering sketches.
    Update as-built CAD drawings per field red-lines.
    Update electrical model in ETAP or similar software programs to reflect field changes/modifications.
    Keep up-to-date with latest GIS, CAD, or system modeling software features and use them to improve performance efficiency.
    Assist engineers with calculations, cost estimates, technical reports etc.
    Create bill of materials (BOMs) for various upgrade projects.
    Learn and maintain basic power engineering concepts and fundamentals.
    Provide basic engineering support to installations as required.
    Assist purchasing of materials and equipment for various projects.
    Conduct site survey, data gathering, concept design, cost estimates, and customer coordination for new service applications.
    Keep track of power outages, prepare and present fault event reports, and document system reliability indices.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Tue, 05 Dec 2017 00:00:00 PST 2 years experience with a Bachelor of Science in Electrical Engineering (BSEE) is preferred.
    Intermediate understanding of medium voltage electrical substations and distribution system.
    Experience with power system analysis, distribution system modeling, and protective device coordination.
    Experienced in blueprints, specifications, proposals, and other documentation to prepare time/cost/labor estimates for projects and services.
    Ability to prepare construction schedules in Microsoft Project.
    Must have excellent analytical, organizational, verbal, written, and communication skills.
    Must be a team player and be able to work independently with various partners from start to finish.

    Work Authorization/Security Clearance:
    You must be a US Citizen authorized to work in the US without sponsorship.
    Military Base Security Clearance is required for this position.
    Valid driver s license and ability to travel if required.]]>
    1
    <![CDATA[7630372 - Structural Analysis Engineer - Composites]]>
    ** Permanent residents are NOT eligible for this role **

    ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. Passport in addition to a U.S. Passport are NOT acceptable **

    -Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis). Knowledge of other finite element software such as ABAQUS is beneficial.

    -Aerospace or Defense related experience preferred over airframe or aviation experience.

    -Experience analyzing composites including classical lamination theory and within ANSYS environment. Experience with filament wound composites is a plus.

    -Experience with solid propellants or other viscoelastic materials.

    -Recent college grads are okay with at least some ANSYS experience.

    -Prefer candidates with stable work histories (are not “ job hoppers” and do not have big resume gaps).

    -Master's degree strongly preferred.

    The selected candidate will:

  • Assist other analysts and designers engaged with development and production of new and existing solid rocket motors, propulsion system components and secondary structure.
  • Perform structural analyses utilizing class hand-calculation methods and finite element models.
  • Construct and solve static and dynamic finite element models with ANSYS
  • Participate in test planning and execution.
  • Correlate structural models to test results.
  • Interpret analytical results, assess design margins and prepare technical reports.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Tue, 05 Dec 2017 00:00:00 PST -Proficiency using finite element analysis tools such as ANSYS is required.
    -Proficiency using CAD tools including NX strongly desired.
    -Knowledge and experience with aerospace product development efforts is desired.
    -Must have the ability to read and interpret engineering drawings.
    -Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.
    Keywords:
    Education: -BS in Mechanical, Aerospace, Civil Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
    -Master's degree is strongly preferred.
    Skills and Experience:
    Required Skills:
    AEROSPACE STRUCTURAL ANALYSIS]]>
    1 <![CDATA[Software Engineer]]> ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Tue, 05 Dec 2017 00:00:00 PST Minimum 5 years of software engineering experience
  • Computer Science degree or equivalent experience
  • Expertise with concurrent and distributed systems/web services
  • Expertise in one or high proficiency in a few backend languages preference of Go/PHP/Java
  • Experience with large-scale storage systems including MySQL/PostgreSQL/Redis/Memcache/Redshift/BigQuery/Hadoop/Druid
  • Development in a Linux environment

    Desired Skills:
  • Mobile App development
  • Google Cloud Platform or AWS
  • Data pipelining, large datasets
  • Gitlab CI & Jenkins
  • Docker
  • HTML 5, client-side JS Frameworks, CSS]]> 1 <![CDATA[Mechanical Strength/Stress Engineer]]>
    Responsibilities:
  • Design the vehicle structural elements and configurations in concert with other engineering disciplines.
  • Design of composite structures with attention towards high production manufacturing.
  • Assistance in the development of manufacturing, integration, and test processes and procedures.
  • Launch and mission operations support.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Thu, 30 Nov 2017 00:00:00 PST Bachelor s Degree in Computer Science or in STEM Majors (Science, Technology, Engineering and Math)High school diploma or GED required.
  • Strong expertise in Finite Element Analysis using industry tools such as FEMAP, NASTRAN, and ANSYS.
  • Strong skills in Geometric Dimensioning and Tolerancing drafting skills.
  • Knowledge of the design, analysis, fabrication, and test of composite and metallic structures.

    Preferred Skills and Experience
  • Experience in NX/Teamcenter.
  • Experience in low cost commercial space system ventures.
  • Experience with air launched space launch vehicles.]]> 1 <![CDATA[Customer Support Representative]]>
    Essential Functions include the following:
    1) Travel to dealer and customer locations and understand needs as it relates to the company's offering.
    2) Develop relationships with dealer network in the service area to grow the company s revenue and develop a larger customer base.
    3) Work closely with the sales and service teams in the area to ensure customer services that have been promised are being completed.
    4) Provide detailed sales and pipeline reports to help with sales forecasting.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Thu, 30 Nov 2017 00:00:00 PST 2. Minimum Experience Required: 1-2 Years of Outside sales experience a plus. Must be willing to learn specifics of the material handling industry as it applies to company's Solution Portfolio, Military veterans encouraged to apply.
    3. Skills Required: Valid Driver s License; Computer/Technology must be Proficient in writing and documentation, Customer Service Skills, time management, Strong skillset in technical understanding and troubleshooting of electronics (in person/over the phone), Travel up to 70%]]>
    1
    <![CDATA[7517058 - Creo Turbomachinery Designers]]>
    ** Candidates should have at least 3 years of experience **


    -Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
    -This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
    -Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
    -Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
    -Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
    -Applicant must have prior turbomachinery design or development experience.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Thu, 30 Nov 2017 00:00:00 PST -Ability to read and interpret drawings, blueprints and related specifications.
    -Ability to write clearly and concisely.
    -Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
    -Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
    -Knowledge of design practices, manufacturing techniques and inspection requirements.
    -May require the use of various computer systems to produce data, analysis and reports.
    Keywords:
    Education: -Bachelor's or Master's degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.
    Skills and Experience:
    Required Skills:
    GEOMETRIC TOLERANCING
    GEOMETRIC DIMENSIONING
    AEROSPACE DESIGN
    CREO]]>
    1
    <![CDATA[Software Developer]]> creation and processing tool built on a CAD kernel. This position involves developing 3-D
    modeling algorithms, implementing those algorithms by writing C++ and/or Python code
    against CAD kernel APIs, and using the resulting software to generate parametric 3-D CAD
    models. Other responsibilities include helping other engineers solve problems involving
    CAD modeling and interoperability of CAD models, training new users, and generating
    software documentation.
    KEY RESPONSIBILITIES
  • Develop algorithms for 3-D modeling
  • Implement algorithms in C++ and Python against CAD kernel APIs
  • Provide technical support to Aerion and other customers on the use of these tools
  • Support our culture which expects high levels of performance with a strong work ethic
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Thu, 30 Nov 2017 00:00:00 PST strongly preferred
  • Experience developing software against CAD kernel APIs or CAD modeler APIs, with
    ACIS familiarity strongly preferred
  • Experience using CAD programs preferably CATIA, but SolidWorks, Siemens NX, Pro-
    Engineer acceptable; parametric CAD experience and associated scripting highly
    desirable
  • Strong C++ and Python skills
  • Strong academic credentials, ability to perform independent literature review and
    analysis of research papers, articles, and white papers
    REQUIRED SKILLS
  • Familiarity with standard representations of curves, surfaces, and solids, and with
    operations such as sweeping, skinning, lofting, and booleans
  • Working knowledge of engineering drawing, geometric dimensioning and tolerances,
    and mechanical design
  • Experience with meshing algorithms and their use for CAE
  • Working knowledge of version control systems, project planning and reporting systems,
    and software development project cycle terms
  • Familiarity with software development for Linux/Mac required, with Windows
    experience desired
  • Aerospace experience highly desired but not required
  • Ability to develop high levels of credibility and forge solid professional relationships
    with subordinates, peers, and management]]> 1 <![CDATA[Machinist ]]> This job involves machining of metal components, composites and assemblies.

    SPECIFIC JOB RESPONSIBILITIES & DUTIES:

  • Machine composites and metal parts for the Aerospace industry
  • Perform regular machine shop duties
  • Machine components to within specified tolerances
  • Operate a wide variety of both machines and hand tools to perform duties as assigned
  • Set-ups and operate CNC Lathes / Mills
  • Participate in corrective actions process to prevent defect, downtime and production stops
  • Analyze and diagnose machining and tooling problems
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Thu, 30 Nov 2017 00:00:00 PST

  • Aerospace Machinist with CNC set-up and operation experience
  • Experience with composite machining preferred
  • Experience with Mori Seiki Lathes, OKK Mill Okuma Lathes, HAAS Mill preferred
  • Experience with Fanuc, Mitsubishi, Neomatic 635 controls preferred
  • Ability to read and interpret complex blue prints and procedures
  • Ability to detect tool wear, set-up of new tools
  • Knowledge of proper use of dimensional measuring instruments
  • Knowledge of all applicable hand tools and use of same
  • Advance knowledge of math and trigonometry
  • Ability to work safely throughout our manufacturing facilities
  • Minimum 3-5 years machine shop experience in a manufacturing and / or aerospace environment; and
  • High School Diploma or GED with subsequent course work in relevant training desired;

    PHYSICAL REQUIREMENTS:

  • Ability to work safely throughout the manufacturing, quality and administrative facilities.
  • Sit, stand, bend, stoop, reach, push, and pull, as needed for the duration of the work shift.
  • Must be flexible and agile enough to work safely and effectively in sometimes cramped spaces in and around machinery, equipment, and facility.
  • Able to work effectively under pressure of deadlines.
  • Able to work full time, at least 8 hours a day and 5 days a week, plus overtime as may be required.
  • Good vision required (with or without corrective lenses).
    Able to routinely lift objects up to 40 lbs. as needed (as appropriate with or without the assistance of another worker or lift apparatus]]> 1 <![CDATA[Foreman]]> 1) Dependable worker that can work flexible hours and shifts including overtime and can work weekends as well.
    2) Able to communicate in a professional manner via email, phone and text. Be able to delegate to crew, including full-time and temporary labor.
    3) Being able to speak Spanish will greatly help.
    4) Can travel all over the country/ have reliable transportation.
    5) Can read and understand drawings, plans, and layouts
    5) Able to stand/erect racks, platforms, mezzanines and conveyor (gravity and powered types)
    6) General understanding of construction fundamentals
    7) being able to work in ambient, cooler, and freezer conditions.

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Wed, 29 Nov 2017 00:00:00 PST Basic computer skills
    Able to manage a crew of three to four laborers
    Lots of travel in the U.S.
    Bilingual Spanish is preferable]]>
    1
    <![CDATA[Design Engineer ]]> Will be designing jigs and fixtures for the Dynos.

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Wed, 15 Nov 2017 00:00:00 PST BS degree required.
    Some experience with electrical and mechanical components.
    Automotive/aerospace industry preferred
    Must have 2 D and 3D, parts assembly experience using CATIA.
    Experience in a fast pace environment
    ]]>
    1
    <![CDATA[Support Equipment Design Engineer IV]]>
    Support equipment design for engine assembly, test and delivery of large liquid rocket engines. In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.

    Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, data management/drawing tracking & design change implementation. Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages. Leads preliminary and critical design review preparations. Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met. Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness. Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Tue, 14 Nov 2017 00:00:00 PST 10+ years of experience and a Bachelors Degree or equivalent are required.
  • Creo experience is required.
  • Aerospace assembly support equipment design & product design experience required (GSE).
  • Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
  • Must be an experienced engineer with CAD skills using PTC Creo2.
  • Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
  • Pre-verification of CAD models and drawings in the PLM system is also required.
  • Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
  • Expert knowledge of reading and interpreting drawings and related specifications is also required.
  • Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of product teams.]]> 1 <![CDATA[Sr. Engineer, Panel Design & Analysis]]>
    ESSENTIAL DUTIES AND RESPONSIBILITIES:
    Own design of panels, panel components, and manufacturing tooling
    Work with program engineering to create panel design specifications from customer specifications
    Design panels (solar arrays)
    Design panel components: brackets, restraints, PCBs, etc.
    Design panel handling frames, brackets, and test fixtures.
    Own panel design and manufacturing documentation (drawings and BOMs)
    Maintain Panel Design Method and Rules manuals
    Maintain Panel Standard Parts and Assemblies List
    Maintain block libraries for panel drawings
    Maintain standard drawing templates for all typical drawing types
    Train panel drafters in and ensure compliance with documented design methods, including methods for drafting and design review.
    Develop design methods to ensure product compliance with special performance requirements (magnetic moment, magnetic field, circuit capacitance and inductance, etc.) as needed.
    Ensure smooth and error-free transfer of design data to drafters, operations, and manufacturing teams
    Own panel design flow and tools
    Maintain design environments and flows
    Responsible for continuous improvement of panel design tools to reduce design time and increase design accuracy (reduce design errors).
    Perform panel performance analysis
    Power Analysis, including Radiation Analysis
    Mass Analysis
    Magnetic Moment Analysis
    Reliability Analysis
    AO Analysis
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Tue, 14 Nov 2017 00:00:00 PST BS degree in mechanical/electrical/aerospace engineering, physics, or applied physics.

    MINIMUM EXPERIENCE:

    5 years of experience in product related engineering design and/or analysis

    DESIRED QUALITIES/EXPERIENCE:

    Experience in a design engineering role.
    Experience with engineering process automation tools (creation and use).
    Experience in space related business.
    Must be able to work both independently and as a member of a cross-functional team.
    Must have strong analytic skills.
    Must have strong communication skills, both written and verbal.
    Must work well in a multi-tasking environment.
    Experience in cost justification for new processes and procedures required
    Equivalent combination of education and experience will be accepted]]>
    1
    <![CDATA[Design Engineer II ]]> ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Mon, 13 Nov 2017 00:00:00 PST BS degree in ME
    7-10 yrs. experience with engine design, preferably within a motorsports environment.
    Demonstrated strong understanding of fundamental mechanical engineering principals.
    Strong experience w/3D CAD tools, preferably CATIA V5 and Enovia.
    Working experience with CATIA FEA, Ricardo PISDYN & RINGPAK (or similar) analysis tools]]>
    1
    <![CDATA[R&D Embedded Software Engineer]]>
    The ideal candidate should also have a reputation for hands-on learning/building, quality, and work ethics. Our client is specifically looking for a technically sound, rapid-paced, entrepreneurial individual that understands the embedded engineering discipline and can easily manage projects for multiple technologies.

    Responsibilities and Essential Functions:
  • Support all levels of requirements development, management, and verification
  • Develop and maintain system and subsystem specifications, use cases, diagrams, ICDs, operational flow diagrams, and integration development
  • Conduct and lead team through documenting trade studies
  • Work on the board support package, drivers, and/or sensors/servo/motor interfacing, control, and logic for the vehicle's avionics platform.
  • Assist our Electrical Engineering team with component selection, bring-up and troubleshooting of custom hardware designs.
  • Participate in the team's software processes including requirement and design documentation, test-plan generation and execution, peer design and code reviews, process feedback and improvements.
  • Attend strategic conferences
  • Responsible for on-time, on-quality delivery of personal work
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Fri, 03 Nov 2017 00:00:00 PDT B.S. in Computer Science or B.S Aerospace Engineering / other engineering discipline with equivalent experience
  • Experience with hardware and software board bring-up
  • Experience with embedded interfacing such as CAN bus, SPI, I2C, RS485, between MCUs
  • Experience with RTOS systems preferred
  • Experience in C / C++ in build environments and use of electronics principles including schematics, using Oscilloscope, Digital Logic Analyzer, multi-meter, microscope inspections
  • Experience with operating system fundamentals for embedded systems, networking and Linux
  • Electronics and Mechanical Background: Wire harness design, electronics prototyping, soldering

    Desired Experience:
  • Experience with Microchip PIC32, NXP MPC57xx, ARM preferred
  • Networking knowledge: TPC/IP, UDP/IP, client and serve
  • System IPC and RPC knowledge: RPC systems such as JSON/RPC, XML/RPC, Protobuf/RPC & System message ICD, binary protocol parsing
  • Hobby or Civilian (Part 107) UAV experience or robotics experience
    ]]> 1 <![CDATA[R&D Program/Project Manager ]]>
    Description:
    We are looking for someone to help lead our current and future R&D programs using management techniques with technical acuity. We need an individual with strong analytical and operational capabilities as well as organizational intelligence with a technical background. In short, we re looking for someone to be the glue that holds our teams together.
    The right candidate will be a collaborative technical leader who can maintain a big picture view of the business and can provide direction, inspiration, and experience to the technical leadership and our community of engineers. We are looking for someone to help shape a vision of R&D engineering management activities and then execute on that vision. On the flip side, we re also looking for someone who can get in to the weeds with the engineering staff and follow through on action items and tight timelines.
    This individual will participate in all phases of technology development including concept development, scheduling, trade studies, resource allocation, requirements development/analysis/allocation, mechanical system design/analysis, electrical systems design/analysis, software and hardware design/analysis, algorithm/controls design/analysis, systems modeling, risk management, manufacturing, integration, test and documentation. The ideal candidate should also have a reputation for hands-on learning/building, quality, and work ethics. Our Client is specifically looking for a sound, rapid-paced, entrepreneurial individual that understands the engineering process and can easily manage multiple projects for multiple technologies.


    R&D Program / Project Manager Responsibilities and Mindset:
    Support the success of the team by bridging technical knowledge, program management and resource allocation. Responsible for on-time, on-quality delivery of personal work.
    Ability to empathize and engage engineers and help them look at things through a business lens.
    Capable of building and nurturing relationships across multiple networks using collaborative and empathetic skills
    Strong analytical skills and exemplary time management/organizational skills
    Excellent discretion, demonstrating sound judgement in dealing with confidential dialogues and information
    Great communication and negotiation skills, bringing together different views, personalities, goals, and needs, and helping different stakeholders find business alignment and growth
    Responsible to bring innovation discussion to customers/industry and help our Client's brand as an innovation company. Passion for business and operations.
    Candidates should also have strong verbal and written communication skills, strong team building skills, and be comfortable working on large teams with talented engineering from other engineering disciplines.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Mon, 23 Oct 2017 00:00:00 PDT B.S. with typically 6+ years work experience and proven successful experience in unmanned systems or large aerospace system program/project management. MBA Preferred. Proven track record managing unmanned systems would be ideal.
    6+ years in leading scrum teams in the development of software, hardware, and fully integrated UAS systems.
    Candidate needs to be fluent in mechanical engineering (CFD, thermal, structural/FEM), electrical engineering (hardware design, component selection), software engineering (RTOS, communication protocols (i.e. I2C, SPI, CAN), mobile/web software), aircraft principles, navigation principles, unmanned systems payloads (imagery, LIDAR, GIS, etc), and general system architectures. Candidate will be required to generate system specifications for unmanned systems and Statements of Work (SOWs) for contractors.
    Complete knowledge of Project Management theory, concepts, and principles (theory of constraints, critical path methodology, project risk management, project scope management, project lifecycle, etc)
    Ability to clarify purpose and importance; stresses major points; can follow a logical sequence
    Ability to create and maintain multiple comprehensive multi-tiered project schedules with resource loading. Extensive, specialized ability to identify time frames for key project milestones/resources, ensure alignment of sub tier activities for overall project visibility, tracking and completion, direct and manage more complex project schedules requiring interfacing with multi regional or international activities, independently identify project resource requirements, and integrate and direct multi project elements into a single collective overall project plan without formal authority.
    Ability to convey Company capabilities and competencies and articulate key skills associated with accomplishing defined statements of work.
    Capable of making customers and their needs a primary focus of one s actions as a project team leader; ability to develop and sustain productive customer relationships as they relate to project team leadership responsibilities; actively seeks information to understand customers circumstances, problems, expectations, and needs; presents project level information to customers to build their understanding of issues and capabilities;
    Ability to recognize a wide range of complex, specialized issues, problems, or opportunities.
    Working knowledge of US domestic and international UAS aviation regulations, customer requirements, competitors, software products, and related technologies.
    Attends trade shows, industry conferences and customers/partners meetings
    Holder of FAA Part 107 Remote Pilot License Desired.]]>
    1
    <![CDATA[Turbomachinery Design Engineer]]>
    ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. Passport in addition to a U.S. Passport are NOT acceptable **

  • Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
  • This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
  • Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
  • Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
  • Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
  • Applicant must have prior turbomachinery design or development experience.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Fri, 13 Oct 2017 00:00:00 PDT Knowledge of geometric dimensioning and tolerancing.
  • Ability to read and interpret drawings, blueprints and related specifications.
  • Ability to write clearly and concisely.
  • Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
  • Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
  • Knowledge of design practices, manufacturing techniques and inspection requirements.
  • May require the use of various computer systems to produce data, analysis and reports.
    Keywords:
    Education: Bachelor's or Master's degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.

    Required Skills:
  • GEOMETRIC TOLERANCING
  • GEOMETRIC DIMENSIONING
  • AEROSPACE DESIGN
  • CREO]]> 1 <![CDATA[Test Engineer]]>
    Responsibilities
    Test planning Work with the respective engineers to understand the test article function, and design a test configuration that replicates the critical flight/GSE loading environments, including instrumentation requirements.
    Structure Design/Analyze the structural backbone of the test stands.
    Controls Design the actuation system to apply test loads.
    Instrumentation Source and install all necessary instrumentation.
    Implementation Integrate the systems, write the control software, and perform the tests.

    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]>
    Fri, 13 Oct 2017 00:00:00 PDT 3+ years engineering experience
    Experience with CAD software, preferably NX
    Experience with FEA of welded structures
    Capability to design and implement hydraulic control systems
    Strong Labview experience
    Ability and willingness to thrive in a fast-paced, rapidly changing work environment
    Driven, highly motivated, and committed to improvement

    Strong experience in Geometric Dimensioning and Tolerancing
    Experience in general metal fabrication
    Passion for space exploration and a firm belief in the utility of affordable access to space
    Ability to thrive as a one person team ]]>
    1
    <![CDATA[CFD Engineer]]>
    Responsibilities will include:
  • Simulations - Setup and running of CFD simulations on our in-house systems as well as remote cluster.
  • Reporting - Interpretation & analysis of results and summarizing for the wider design and development team to make use of them.
  • Automation - Development of scripts and macros to manage and improve the automated CFD tasks.
  • Development Generation of novel methods and techniques to tackle new problems in fluid dynamic analysis.
  • Liaison with the wider design team and other internal organizations.
  • Understanding testing and instrumentation used to measure data for validation of simulations.
  • Preparation of detailed technical presentations for project engineering review.
    ----------------------------
    Two Roads is an Equal Opportunity Employer: EEO/AA/M/F/Veteran/Disability]]> Tue, 12 Sep 2017 00:00:00 PDT Proficient with Siemens Star-CCM+ with 3-5 years experience with that code
  • Demonstrated experience and excellence in engine systems modelling and analysis using CFD
  • Working knowledge of CONVERGE and 1D system simulation software an asset
  • Programming skills in MATLAB, Java and Python
  • Experience in Linux HPC environment
  • Experience in managing projects to a high standard and keeping deadlines
  • Working knowledge of Dassault CATIA V5 beneficial
  • High standard of care and attention to the quality of your work - including good practice record keeping, documentation, standards / conventions
  • Mature, responsible, autonomous, team player - capable of leading development projects

    Flexible working hours (including OT) and the ability to work well under pressure are both central to this role, along with excellent interpersonal and communication skills.]]> 1